How to change the faucet for different types of faucet

Faucet is one of the necessities in our daily life. It can not only provide important water, but also can help people solve their living needs. However, if it is broken, how can the faucet be changed ? How should different types of faucets be installed?

1, how to change the tap

First of all, before you change the faucet, you have to prepare a few things: One is to buy a suitable new faucet. What is usually used in the ordinary, we must buy the same, otherwise the size will not match. Then, we also need to prepare a water-proof cloth. This thing is mainly used to prevent the faucet from leaking. In addition, repair tools, such as wrenches, vise, etc., must be prepared for installation.

Secondly, use a wrench to remove the broken faucet, usually twist the faucet counterclockwise, but do not use too much force to prevent the hose from being cracked and burst. Then, start installing the faucet. But before that, remember to close the floodgate first, or you'll just wait for the flood of Jinshan. At the same time, when replacing the faucet, remember to wrap the tape with two or three turns at the mouth of the faucet and evenly when wrapping it. This will make it easier to install and will not leak.

Then, how do you change the faucet? After the previous steps are all done, you will align the faucet with the water-proof cloth, and be careful to align the threads of the interface. Otherwise, the faucet will be twisted, which will lead to water leakage. Then, start tightening it clockwise, taking care not to apply too much force.

Finally, if you open the floodgate, if the faucet is normally out of water and it will not leak, it means that the replacement is successful and you can use it normally. However, there are many types of faucets and different types of faucets have different installation methods. How to install them?

2, how to install the Sink Tap or taps

a, thermostatic faucet

Before installing this type of faucet, it is necessary to check in advance whether there is any hot or cold in the water pipe. If it cannot be connected wrongly, it will affect the normal use.

b. Wall-mounted faucet

If it is to install a wall-mounted faucet, be sure to clean the water pipe before installing, and then the distance between the hot and cold water pipes should be controlled, usually about 15 cm. If it is lower than this distance, it will certainly affect its use.

c, Single Hole Faucet

This kind of faucet is widely used in the kitchen. The installation method is almost the same as the step of replacing the faucet in the front. Everybody can refer to the above content to operate.

Conclusion: For how to change the faucet and how to install different types of faucets on this, I hope to provide a little help for everyone. In fact, in life, we must also pay attention to the maintenance of the faucet, for example: do not use force to twist the screw, etc., so as to ensure its good life.

How to change the faucet