To solve Kitchen faucet leakage

we should know the faucet in the cooking area occupies an extremely important position in daily life. It is directly connected to our food, tableware, etc. Leaking of faucets is a problem that is often encountered. Many times it is due to being overwhelmed during use. Tight or too loose, resulting in damage to the sealing tape of the faucet fixing screw. If it is not processed in time, it will waste a lot of water resources, leading to high water charges, thus increasing daily expenses. How to deal with As we all know, the faucet in the cooking area occupies an extremely important position in daily life. It is directly connected to our food, tableware, etc. Leaking of faucets is a problem that is often encountered. Many times it is due to being overwhelmed during use. Tight or too loose, resulting in damage to the sealing tape of the faucet fixing screw. If it is not processed in time, it will waste a lot of water resources, leading to high water charges, thus increasing daily expenses. How to deal with leakage of kitchen faucets ? Let's take a look below and hope to provide some help for your maintenance. ? Let's take a look below and hope to provide some help for your maintenance.

How to deal with leakage of kitchen faucet

1, water leakage at the outlet

Leakage occurred in this area, mainly due to the damage of its internal axis. The disposal method was to use a tool to loosen and remove the cap and remove the shaft washer with a new one.

2, the leading cockroach gap leakage

The leakage of water in the gap between the lower and upper parts of the product is mainly caused by the damage of the triangular sealing mat. The disposal method is to remove the steamed bread with related tools. Then the cover is loosened, and then the inside cover of the gland is removed. Replace it with new ones.

3, leaking over the joint

The juncture of the joints presents a dripping condition, most of which is caused by the loosening of the cap nuts, which is handled by re-tightening the objects or replacing them with new U-shaped seals.