Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Select Language
In our home life, the use frequency of the taps is the highest. Basically, taps are used every day in daily life. With such high frequency of use, how can we maintain the faucets and extend the service life? In fact, small The editor feels that this is not a difficult task, as long as the correct method of installation, use, and maintenance is in place, the actual service life of the faucet can be extended, and it can always be bright as new.
First, the installation of the faucet
We must install experienced and qualified professionals to install and install faucets. When installing, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the surface, so as not to damage the surface coating gloss. Pay attention to remove the debris from the pipe and install the faucet.
Second, the use of taps
Don't use too much force when you open the faucet, because the pressure of the water flow far exceeds the capacity it can withstand. Too fast to open it will affect its service life.
In the event of water leakage, the faucet should be repaired immediately. The sealing effect of a qualified tap is very good when it is put into use. However, since the ceramic seal is sensitive to hard impurities such as sand and stone in the water, the sealing surface is likely to be worn, and the leakage occurs after scratching. And once a leak has occurred, the amount of dripping will continue to increase, forming a linear flow, so once leakage is detected, the leaking faucet should be repaired as soon as possible.
Under normal water pressure, using a period of time to find that the amount of water decreases, or even the phenomenon of the water heater out of flame, you can gently unscrew the screen cover at the outlet of the faucet to remove impurities, generally can be restored as ever.
Third, the maintenance of the faucet
Adding a constant-voltage, constant-current, and high-efficiency automatic water-saving device is also a good method. After setting the water-saving device, the faucet maintains the best stable flow under high water pressure, and it truly turns the concept of limiting water-saving into reality. The tap does not need to be adjusted during the opening process. It also reduces the erosion of sand and stone in the water to the ceramic sealing surface and prolongs the service life of the faucet.
Also note that:
1. It can be wiped with 3-5 minutes after the vehicle wax is sprayed onto the faucet surface, which can maintain the brightness of the faucet sample;
2. It is best not to touch directly by hand, because oil on the hand is easily stained on the surface of the faucet, it is not easy to clean, affect the finish.
Do not look at the small size of the bathroom faucet, but if you do not use it during the use of good maintenance, resulting in shortened life, it will affect your entire bathroom quality of life Oh! Finally, the stains on the faucet should be cleaned with detergent as soon as possible, because the accumulation of stains can easily act as an electrolyte for the place where the faucet is in contact with the water pipe, resulting in different degrees of corrosion of the water pipe and the faucet. The trail will be cleared in time.
October 14, 2022
October 14, 2022
Envoyer à ce fournisseur
October 14, 2022
October 14, 2022