How to change your hand shower

With the gradual emphasis on the quality of bathing, showers have also received a lot of attention. Many of my friends bought cheap showers at first, but after using them for a long time, the poles were rusted. The reason is that the cheap shower wall is thin and the material is not chrome-plated. It is chrome-plated. Once it is used for a long time, it starts. Rusted.

Here we take a look at how to change the shower, but also for some netizens who need to be replaced:

The original shower has been rusted

This is a new shower. On the surface is a layer of red calendered coating similar to titanium, material, wall thickness, and all copper. Although the ordinary chrome plating is also very beautiful, it splashes on the whole flower. If it does not dry after wiping it clean, it will continue to spend.

First of all, remove the original shower, of course, the water valve to shut. Deposits due to excessive water quality may cause difficulty in demolition and give a little effort. In order to prevent damage to the original hot and cold water outlets, you can use wet old belts around the base, and then use a pair of pliers to remove the shower on the belt.

After the original shower was removed, the hot and cold water outlets were exposed. The above fixed hardware of the original shower should also be removed and all rust and sediment should be removed.

Install the shower first to install the mixing faucet, as long as the original outlet location is good, there is no problem.

After picking up the mixing faucet, the rest is easy. Insert a section of the connecting rod, fix the hole in the wall, and screw the shower head on.

The effect of the final installation is not bad, this is relatively simple, if the hands-on ability is not strong, the best students still find a professional to install.